1000Hz Mouse Polling Rate Test
A 1000Hz mouse polling rate test confirms your mouse is reporting its position 1,000 times per second — every 1 millisecond. 1000Hz (1ms) has been the competitive gaming standard for over a decade and is the default for virtually all dedicated gaming mice. At 1000Hz, cursor movement is ultra-responsive and the polling delay contributes just 1ms to your total system latency. This test verifies your mouse is actually achieving 1000Hz and not defaulting to a lower rate.
Polling Rate
Click Start, then move your mouse
Move your mouse continuously over the test area for 3 seconds. Your polling rate is calculated automatically.
Why Is 1000Hz the Standard Polling Rate for Gaming Mice?
| Polling Rate | Tier |
|---|---|
| 125 Hz | Legacy |
| 250 Hz | Below Average |
| 500 Hz | Standard |
| 1000 Hz | Gaming |
| 2000 Hz | High Polling |
| 4000 Hz | Ultra Polling |
| 8000 Hz | Esports Apex |
Frequently Asked Questions
Is 1000Hz polling rate good for gaming?
1000Hz is excellent for gaming and remains the universal standard for competitive mice. At 1ms report intervals, polling rate is no longer the bottleneck in your input chain — monitor refresh rate and system processing lag are typically larger contributors. All major gaming mice (Logitech G Pro, Razer DeathAdder, SteelSeries Prime, Zowie EC) default to or support 1000Hz. This is where most gamers should be.
Does 1000Hz polling rate make a real difference vs 125Hz?
Yes — the jump from 125Hz (8ms) to 1000Hz (1ms) is the most impactful polling rate upgrade possible. At 125Hz, fast mouse movements can look choppy because position updates are 8ms apart. At 1000Hz, motion is smooth and continuous. Beyond 1000Hz (to 2000Hz+), the gains are much smaller. If you're using a mouse at 125Hz, upgrading to 1000Hz will have a visible impact on cursor smoothness.
What gaming mice support 1000Hz polling rate?
All modern dedicated gaming mice support 1000Hz: Logitech G Pro X Superlight 2, Razer DeathAdder V3, SteelSeries Aerox 3, Glorious Model O, Pulsar X2, ASUS ROG Gladius, HyperX Pulsefire, and hundreds more. Most ship with 1000Hz as the default. Budget gaming mice under $30 from Redragon and Havit also commonly support 1000Hz.
What's the difference between 1000Hz and 4000Hz for gaming?
The latency difference is 1ms (1000Hz) vs 0.25ms (4000Hz) — a 0.75ms improvement. In most competitive games running at 240Hz monitors, the minimum frame time is 4.2ms, making a 0.75ms polling improvement theoretically small. Some professional players report perceiving smoother micro-corrections at 4000Hz, particularly in high-sensitivity aiming. For the vast majority of gamers, 1000Hz is the sweet spot of performance vs CPU overhead.
How do I enable 1000Hz on my mouse?
In Logitech G Hub: select your mouse → DPI/Performance tab → set polling rate to 1000Hz. In Razer Synapse: Performance tab → Polling Rate → 1000Hz. In SteelSeries GG: select mouse → Polling Rate → 1000Hz. Zowie mice: physical switch on underside (3 settings). Most gaming mice default to 1000Hz out of the box. Some wireless mice default to 500Hz to conserve battery — check software settings.
Why is my 1000Hz mouse only showing 500Hz or lower in this test?
This typically means: USB hub in use (check your connection chain), browser polling throttle (keep the tab focused during test), USB port shared with other high-bandwidth devices, or the mouse software hasn't applied the setting. Try: direct connection to motherboard USB, fresh driver install, and re-applying the polling rate in software. Some mice require a replug after changing polling rate to take effect.
Last updated: